# View repository changes

**URL:** <https://www.finalbuilder.com/forums/t/view-repository-changes/5077>\
**Category:** Discussion\
**Created:** [October 8, 2013, 10:04am UTC](https://www.finalbuilder.com/forums/t/view-repository-changes/5077 "2013-10-08T10:04:18Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![catenalogic](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/catenalogic/32/116_2.png) [@catenalogic](https://www.finalbuilder.com/forums/u/catenalogic)\
**Post date:** [October 8, 2013, 10:04am UTC](https://www.finalbuilder.com/forums/t/view-repository-changes/5077/1 "2013-10-08T10:04:18Z")

</div>

I have the feeling that the latest changes aren't always reflected to the repository. I have a github repository (set to very frequent == 30 seconds). However when I start the build it does not always contain the latest data.

I also have an issue with a trigger which does not seem to work (on the same repository). To investigate I would really like to see the repository changes (last 5 or something like that) to see the actual status of a repository (has it fetched my latest changes?).

---

<div class="post-metadata">

**Author:** ![Vincent](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/vincent/32/938_2.png) [@Vincent](https://www.finalbuilder.com/forums/u/Vincent)\
**Post date:** [October 9, 2013, 1:04am UTC](https://www.finalbuilder.com/forums/t/view-repository-changes/5077/2 "2013-10-09T01:04:57Z")

</div>

If you look at the Changes tab on the Configuration you should see all the changesets from all the repositories attached to the Config :

Attachment unavailable

---

<div class="post-metadata">

**Author:** ![catenalogic](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/catenalogic/32/116_2.png) [@catenalogic](https://www.finalbuilder.com/forums/u/catenalogic)\
**Post date:** [October 9, 2013, 9:06am UTC](https://www.finalbuilder.com/forums/t/view-repository-changes/5077/3 "2013-10-09T09:06:37Z")

</div>

Thanks. That’s what I use to check, but then I have to start a build first. What I do now is:   
  
 1) Start a build   
 2) Go to changes tab   
 3) Notice that it hasn’t used the latest changeset   
 4) Stop the build   
 5) Reset the repository, start at 1   
  
 That’s why it would be great if I can just see the changes of a repository on the same screen as the reset option.

---

<div class="post-metadata">

**Author:** ![Vincent](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/vincent/32/938_2.png) [@Vincent](https://www.finalbuilder.com/forums/u/Vincent)\
**Post date:** [October 9, 2013, 9:23am UTC](https://www.finalbuilder.com/forums/t/view-repository-changes/5077/4 "2013-10-09T09:23:36Z")

</div>

So are new changes showing up after you reset the repository? If so then thats a problem. When you start a build, it actually tells the repo to check for new changes, to make sure we are building the latest changes.   
  
 What settings do you have on the repository and the trigger? The branch settings may be why you are not seeing the changes.

---

<div class="post-metadata">

**Author:** ![catenalogic](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/catenalogic/32/116_2.png) [@catenalogic](https://www.finalbuilder.com/forums/u/catenalogic)\
**Post date:** [October 9, 2013, 9:26am UTC](https://www.finalbuilder.com/forums/t/view-repository-changes/5077/5 "2013-10-09T09:26:05Z")

</div>

This is one without a trigger (manual start).

---

<div class="post-metadata">

**Author:** ![Vincent](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/vincent/32/938_2.png) [@Vincent](https://www.finalbuilder.com/forums/u/Vincent)\
**Post date:** [October 9, 2013, 9:28am UTC](https://www.finalbuilder.com/forums/t/view-repository-changes/5077/6 "2013-10-09T09:28:11Z")

</div>

What about the repository. Is it set to look at All Branches?

---

<div class="post-metadata">

**Author:** ![catenalogic](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/catenalogic/32/116_2.png) [@catenalogic](https://www.finalbuilder.com/forums/u/catenalogic)\
**Post date:** [October 9, 2013, 9:29am UTC](https://www.finalbuilder.com/forums/t/view-repository-changes/5077/7 "2013-10-09T09:29:28Z")

</div>

Single branch (develop), which I know has a change (we actively develop on the “develop” branch, we run production builds from “master” branch).   
  
 See this repository: [https://github.com/catel/catel](https://github.com/catel/catel)

---

<div class="post-metadata">

**Author:** ![Vincent](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/vincent/32/938_2.png) [@Vincent](https://www.finalbuilder.com/forums/u/Vincent)\
**Post date:** [October 9, 2013, 9:41am UTC](https://www.finalbuilder.com/forums/t/view-repository-changes/5077/8 "2013-10-09T09:41:50Z")

</div>

Ok, I will set up a config here with that repo and track changes. I am wondering if it has something to do with github going down occasionally (which seems to be getting more frequent).
