# Using "Map Network Drive" to connect via WEBDAV

**URL:** <https://www.finalbuilder.com/forums/t/using-map-network-drive-to-connect-via-webdav/4733>\
**Category:** Feature Requests\
**Created:** [October 26, 2007, 9:28am UTC](https://www.finalbuilder.com/forums/t/using-map-network-drive-to-connect-via-webdav/4733 "2007-10-26T09:28:09Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![kim\_bracknell](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/k/848f3c/32.png) [@kim\_bracknell](https://www.finalbuilder.com/forums/u/kim_bracknell)\
**Post date:** [October 26, 2007, 9:28am UTC](https://www.finalbuilder.com/forums/t/using-map-network-drive-to-connect-via-webdav/4733/1 "2007-10-26T09:28:09Z")

</div>

In using the current "Map Network Drive" action one can only use the \\Servername\Sharename UNC format in the Sharepath to map a drive. With connections&nbsp;via WEBDAV, such as those to Sharepoint libraries, the following connection format is necessary in order to maqp a drive: [http://Servername/sites/Libname](http://Servername/sites/Libname). Can such connections be accommodated in Automise?

Thx,

Kim.

---

<div class="post-metadata">

**Author:** ![paulsamways](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/p/e8c25b/32.png) [@paulsamways](https://www.finalbuilder.com/forums/u/paulsamways)\
**Post date:** [October 29, 2007, 2:18am UTC](https://www.finalbuilder.com/forums/t/using-map-network-drive-to-connect-via-webdav/4733/2 "2007-10-29T02:18:15Z")

</div>

Hi Kim,   
  
 You should be able to use the ‘[http://Servername/sites/Libname](http://Servername/sites/Libname)’ address to map the WEBDAV drive in Automise using the ‘Map Network Drive’ action.   
  
 Regards,   
 Paul.
