# Trigger not running

**URL:** <https://www.finalbuilder.com/forums/t/trigger-not-running/4902>\
**Category:** Discussion\
**Created:** [January 1, 2013, 4:15am UTC](https://www.finalbuilder.com/forums/t/trigger-not-running/4902 "2013-01-01T04:15:01Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![diegogarcia](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/diegogarcia/32/105_2.png) [@diegogarcia](https://www.finalbuilder.com/forums/u/diegogarcia)\
**Post date:** [January 1, 2013, 4:15am UTC](https://www.finalbuilder.com/forums/t/trigger-not-running/4902/1 "2013-01-01T04:15:01Z")

</div>

Hi guys I've setup an trigger to run on repository changes, the quiet time is set to 1 minute, the build gets queed but doesnt start ...&nbsp;

Is there something wrong ?

No error logs is displayed ...

Regards,  
Diego Garcia

---

<div class="post-metadata">

**Author:** ![Vincent](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/vincent/32/938_2.png) [@Vincent](https://www.finalbuilder.com/forums/u/Vincent)\
**Post date:** [January 1, 2013, 4:23am UTC](https://www.finalbuilder.com/forums/t/trigger-not-running/4902/2 "2013-01-01T04:23:32Z")

</div>

this doesn’t sound like a trigger problem, if the build is queued then the trigger has done it’s job. Go into the build view and switch to the timeline tab, what does it say. Also , check that you have a compatible agent.

---

<div class="post-metadata">

**Author:** ![diegogarcia](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/diegogarcia/32/105_2.png) [@diegogarcia](https://www.finalbuilder.com/forums/u/diegogarcia)\
**Post date:** [January 1, 2013, 4:25am UTC](https://www.finalbuilder.com/forums/t/trigger-not-running/4902/3 "2013-01-01T04:25:51Z")

</div>

Here is what is showing:   
 ERx : Release#16AutoBuildNever Edit Start Start Now   
 Build Queued#16AutoBuild–Stop   
  
 An loading gif is showing but nothing happens …

---

<div class="post-metadata">

**Author:** ![Vincent](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/vincent/32/938_2.png) [@Vincent](https://www.finalbuilder.com/forums/u/Vincent)\
**Post date:** [January 1, 2013, 4:42am UTC](https://www.finalbuilder.com/forums/t/trigger-not-running/4902/4 "2013-01-01T04:42:11Z")

</div>

have a look in the eventlog, are any errors being logged?

---

<div class="post-metadata">

**Author:** ![diegogarcia](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/diegogarcia/32/105_2.png) [@diegogarcia](https://www.finalbuilder.com/forums/u/diegogarcia)\
**Post date:** [January 1, 2013, 4:54am UTC](https://www.finalbuilder.com/forums/t/trigger-not-running/4902/5 "2013-01-01T04:54:23Z")

</div>

There was nothing reported in event log

---

<div class="post-metadata">

**Author:** ![deleted\_user](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/deleted_user/32/937_2.png) [@deleted\_user](https://www.finalbuilder.com/forums/u/deleted_user)\
**Post date:** [February 1, 2013, 6:01am UTC](https://www.finalbuilder.com/forums/t/trigger-not-running/4902/6 "2013-02-01T06:01:30Z")

</div>

I have a similar problem. The git repo trigger does not seem to detect the change. I used Sysinternals Process Monitor and I can see that the Continua.Server.Service.exe is able to invoke git. However, it doesn’t seem to detect that there was a change.

---

<div class="post-metadata">

**Author:** ![Vincent](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/vincent/32/938_2.png) [@Vincent](https://www.finalbuilder.com/forums/u/Vincent)\
**Post date:** [February 2, 2013, 1:49am UTC](https://www.finalbuilder.com/forums/t/trigger-not-running/4902/7 "2013-02-02T01:49:19Z")

</div>

Hi Hatim   
  
 On the configuration view page, switch to the Changes tab, do any changesets show up there? If not then the first issue is to make sure your Branch pattern and Default branch settings are correct. If you have changes, the second thing to check is the Trigger From setting on the Trigger. Try setting it All Branches initially, then commit a change to the git repository. You should see the changeset turn up on the configuration Changes tab, and the trigger should queue a build. If your trigger has a branch pattern, then again you need to make sure it will match a branch found by the branch pattern on the Repo.
