# "Stop Run (failure) don't switch to OnFailure list
**URL:** https://www.finalbuilder.com/forums/t/stop-run-failure-dont-switch-to-onfailure-list/3471
**Category:** Bugs
**Created:** [March 7, 2013, 5:37am UTC](https://www.finalbuilder.com/forums/t/stop-run-failure-dont-switch-to-onfailure-list/3471 "2013-03-07T05:37:21Z")
**Posts on this page:** 8
**Page:** 1
### Author:  [@axel.schiers](https://www.finalbuilder.com/forums/u/axel.schiers)
#### Post date: [March 7, 2013, 5:37am UTC](https://www.finalbuilder.com/forums/t/stop-run-failure-dont-switch-to-onfailure-list/3471/1 "2013-03-07T05:37:21Z")
Hello,
we have a problem with the “Stop Run (failure)” action in Finalbuilder.
Normally our buildmaster should get an email, if an error occured and the buildprocess is stopped, it seems to us that this is not (always) the case anymore. We had a problem that we couldn’t get the sources from our repository and therefore the build stopped, but no information was send by email.
I attached 2 pictures, the first shows the part of our script where the error occured and the second one shows the corresponding logfile.
I would expect that after “End” the OnFailure List will be executed. Or this this assumption wrong?
We are using FB 7.0.0.2056 with Win xPSP3
Best regards
Axel
---
### Author:  [@axel.schiers](https://www.finalbuilder.com/forums/u/axel.schiers)
#### Post date: [March 7, 2013, 5:39am UTC](https://www.finalbuilder.com/forums/t/stop-run-failure-dont-switch-to-onfailure-list/3471/2 "2013-03-07T05:39:05Z")
Uploading the pictures didn’t work the first time
---
### Author:  [@axel.schiers](https://www.finalbuilder.com/forums/u/axel.schiers)
#### Post date: [March 7, 2013, 5:39am UTC](https://www.finalbuilder.com/forums/t/stop-run-failure-dont-switch-to-onfailure-list/3471/3 "2013-03-07T05:39:52Z")
> Posted By Axel on 07 Mar 2013 10:39 AM
> Uploading the pictures didn't work the first time
Also not the second time ...
---
### Author:  [@Vincent](https://www.finalbuilder.com/forums/u/Vincent)
#### Post date: [March 7, 2013, 10:19am UTC](https://www.finalbuilder.com/forums/t/stop-run-failure-dont-switch-to-onfailure-list/3471/4 "2013-03-07T10:19:59Z")
Pleased send them to support @ [finalbuilder.com](http://finalbuilder.com) - also your project file if possible. That would make it much easier to figure out what is going on.
---
### Author:  [@axel.schiers](https://www.finalbuilder.com/forums/u/axel.schiers)
#### Post date: [March 8, 2013, 3:06am UTC](https://www.finalbuilder.com/forums/t/stop-run-failure-dont-switch-to-onfailure-list/3471/5 "2013-03-08T03:06:02Z")
Mail send
---
### Author:  [@axel.schiers](https://www.finalbuilder.com/forums/u/axel.schiers)
#### Post date: [March 20, 2013, 3:06am UTC](https://www.finalbuilder.com/forums/t/stop-run-failure-dont-switch-to-onfailure-list/3471/6 "2013-03-20T03:06:48Z")
Hi Vincent,
could you find anything that explains the behaviour?
Best regards
Axel
---
### Author:  [@Vincent](https://www.finalbuilder.com/forums/u/Vincent)
#### Post date: [March 20, 2013, 11:20am UTC](https://www.finalbuilder.com/forums/t/stop-run-failure-dont-switch-to-onfailure-list/3471/7 "2013-03-20T11:20:25Z")
Hi Axel
Apologies for the delay, we have been able to reproduce the problem, but have yet to figure out why it’s happening. As a work around you can use the Raise Exception action, which does cause the onerror action list to run.
---
### Author:  [@axel.schiers](https://www.finalbuilder.com/forums/u/axel.schiers)
#### Post date: [March 21, 2013, 4:29am UTC](https://www.finalbuilder.com/forums/t/stop-run-failure-dont-switch-to-onfailure-list/3471/8 "2013-03-21T04:29:45Z")
Hi Vincent,
Thanks a lot for the work around.
Best regards
Axel