# Specifying a configuration when calling NUnit

**URL:** https://www.finalbuilder.com/forums/t/specifying-a-configuration-when-calling-nunit/199
**Category:** Discussion
**Created:** [September 18, 2006, 1:04am UTC](https://www.finalbuilder.com/forums/t/specifying-a-configuration-when-calling-nunit/199 "2006-09-18T01:04:20Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![deleted\_user](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/deleted_user/32/937_2.png) [@deleted\_user](https://www.finalbuilder.com/forums/u/deleted_user)
#### Post date: [September 18, 2006, 1:04am UTC](https://www.finalbuilder.com/forums/t/specifying-a-configuration-when-calling-nunit/199/1 "2006-09-18T01:04:20Z")

</div>

Using the NUnit console there is a /config switch but I can’t see a way of using this from within the NUnit action.

Is it possible to set which configuration touse when calling a NUnit test project?

Thanks, Wayne

---

<div class="post-metadata">

### Author: ![paulsamways](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/p/e8c25b/32.png) [@paulsamways](https://www.finalbuilder.com/forums/u/paulsamways)
#### Post date: [September 19, 2006, 1:17am UTC](https://www.finalbuilder.com/forums/t/specifying-a-configuration-when-calling-nunit/199/2 "2006-09-19T01:17:30Z")

</div>

Hi Wayne,  
  
What version of FinalBuilder are you currently using, as the latest version of FinalBuilder 4 already has this option.  
  
Regards,  
Paul

---

<div class="post-metadata">

### Author: ![deleted\_user](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/deleted_user/32/937_2.png) [@deleted\_user](https://www.finalbuilder.com/forums/u/deleted_user)
#### Post date: [September 19, 2006, 10:08am UTC](https://www.finalbuilder.com/forums/t/specifying-a-configuration-when-calling-nunit/199/3 "2006-09-19T10:08:05Z")

</div>

Paul,  
  
I am using the correct version the problem was I assumed that the ‘Project Configuration’ option was for selecting a .config file.  
  
Not sure why I assumed this I think I was focusing on the file selector on the option; just out of curiosity why has it got a file selector?  
  
Thanks for your help  
Wayne

---

<div class="post-metadata">

### Author: ![paulsamways](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/p/e8c25b/32.png) [@paulsamways](https://www.finalbuilder.com/forums/u/paulsamways)
#### Post date: [September 20, 2006, 2:52am UTC](https://www.finalbuilder.com/forums/t/specifying-a-configuration-when-calling-nunit/199/4 "2006-09-20T02:52:30Z")

</div>

Hi Wayne,  
  
I’m not sure why it had the option to select a file, but it has now been removed. Sorry for confusion.  
  
Paul.