# SendLogMessage param TStatusTag not documented

**URL:** https://www.finalbuilder.com/forums/t/sendlogmessage-param-tstatustag-not-documented/1728
**Category:** Discussion
**Created:** [March 30, 2011, 2:00am UTC](https://www.finalbuilder.com/forums/t/sendlogmessage-param-tstatustag-not-documented/1728 "2011-03-30T02:00:18Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![lsondergaard](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/l/dfb087/32.png) [@lsondergaard](https://www.finalbuilder.com/forums/u/lsondergaard)
#### Post date: [March 30, 2011, 2:00am UTC](https://www.finalbuilder.com/forums/t/sendlogmessage-param-tstatustag-not-documented/1728/1 "2011-03-30T02:00:18Z")

</div>

Hi

Action.SendLogMessage takes the text parameter and as a second param "codeinsight" shows me it can also take a StatusTag param of type TStatusTag. However this param is not documented in the help file.

I am guessing you can use it to specify normal, error etc. but what values do I write in the script etc.?

&nbsp;

br Lars

---

<div class="post-metadata">

### Author: ![Vincent](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/vincent/32/938_2.png) [@Vincent](https://www.finalbuilder.com/forums/u/Vincent)
#### Post date: [March 30, 2011, 3:00am UTC](https://www.finalbuilder.com/forums/t/sendlogmessage-param-tstatustag-not-documented/1728/2 "2011-03-30T03:00:26Z")

</div>

The “code insight” should show you the values, they are :   
  
 stInformation - normal output   
 stSuccess - green output   
 stWarning - orange output   
 stError - red output - also interpreted by some actions as errors

---

<div class="post-metadata">

### Author: ![lsondergaard](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/l/dfb087/32.png) [@lsondergaard](https://www.finalbuilder.com/forums/u/lsondergaard)
#### Post date: [March 31, 2011, 2:05am UTC](https://www.finalbuilder.com/forums/t/sendlogmessage-param-tstatustag-not-documented/1728/3 "2011-03-31T02:05:00Z")

</div>

And so it does… Just needed to use the right key combination 🙂   
  
 Thanks, Lars