# Scheduler and Variables\\Log Output

**URL:** https://www.finalbuilder.com/forums/t/scheduler-and-variables-log-output/424
**Category:** Discussion
**Created:** [April 9, 2007, 5:26am UTC](https://www.finalbuilder.com/forums/t/scheduler-and-variables-log-output/424 "2007-04-09T05:26:31Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![rel\_beltone](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/r/f04885/32.png) [@rel\_beltone](https://www.finalbuilder.com/forums/u/rel_beltone)
#### Post date: [April 9, 2007, 5:26am UTC](https://www.finalbuilder.com/forums/t/scheduler-and-variables-log-output/424/1 "2007-04-09T05:26:31Z")

</div>

I am running a scheduled build and would like to suppress output to the command window. This seems to slow down my build quite a bit. I have creating the scheduled build with the built in scheduler and selecting FBCMD as the way to run it.

---

<div class="post-metadata">

### Author: ![paulsamways](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/p/e8c25b/32.png) [@paulsamways](https://www.finalbuilder.com/forums/u/paulsamways)
#### Post date: [April 10, 2007, 1:26am UTC](https://www.finalbuilder.com/forums/t/scheduler-and-variables-log-output/424/2 "2007-04-10T01:26:08Z")

</div>

Hi Larry,  
  
To suppress the output of a project you can add the ‘/XLAM’ command line switch to the scheduled project, you will need to do this through the “Scheduled Tasks” control panel applet.  
  
Regards,  
Paul.