# Queue Options Window is positioned too low

**URL:** https://www.finalbuilder.com/forums/t/queue-options-window-is-positioned-too-low/5236
**Category:** Discussion
**Created:** [September 19, 2014, 9:26am UTC](https://www.finalbuilder.com/forums/t/queue-options-window-is-positioned-too-low/5236 "2014-09-19T09:26:25Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![chillefeld](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/chillefeld/32/1333_2.png) [@chillefeld](https://www.finalbuilder.com/forums/u/chillefeld)
#### Post date: [September 19, 2014, 9:26am UTC](https://www.finalbuilder.com/forums/t/queue-options-window-is-positioned-too-low/5236/1 "2014-09-19T09:26:25Z")

</div>

Hi there,  
  
we have recently upgraded our Continua Installation to 1.5 and now we noticed that for some builds the Queue Options Window when starting builds is position too low on the screen so the lower part gets cut off. This happens when the build configuration has a number of configuration Variables to be set when starting the build. See the attached screenshot.   
We are running Continua 1.5 build 295 and the screenshot was taken from Firefox. We see the same behavior in IE 11 too. I haven’t yet tested it with Chrome.  
  
Regards,  
Christoph

 ![__30545__ 0__QueueBuild.png](https://www.finalbuilder.com/forums/uploads/default/original/2X/4/4d33d83548b9739c9b13047a19c60313a4bf52f3.png)

---

<div class="post-metadata">

### Author: ![Vincent](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/vincent/32/938_2.png) [@Vincent](https://www.finalbuilder.com/forums/u/Vincent)
#### Post date: [September 20, 2014, 7:15am UTC](https://www.finalbuilder.com/forums/t/queue-options-window-is-positioned-too-low/5236/2 "2014-09-20T07:15:41Z")

</div>

Hmmm… I know the team did some work on this reacently. What is your screen resolution?

---

<div class="post-metadata">

### Author: ![peter.toms](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/p/df788c/32.png) [@peter.toms](https://www.finalbuilder.com/forums/u/peter.toms)
#### Post date: [September 22, 2014, 5:43am UTC](https://www.finalbuilder.com/forums/t/queue-options-window-is-positioned-too-low/5236/3 "2014-09-22T05:43:56Z")

</div>

Hi Christoph, thank you for reporting this. We have identified and resolved the issue which we aim to have ready for the next release.   
  
 Thanks again

---

<div class="post-metadata">

### Author: ![chillefeld](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/chillefeld/32/1333_2.png) [@chillefeld](https://www.finalbuilder.com/forums/u/chillefeld)
#### Post date: [September 22, 2014, 7:57am UTC](https://www.finalbuilder.com/forums/t/queue-options-window-is-positioned-too-low/5236/4 "2014-09-22T07:57:57Z")

</div>

Hi,   
 that is good to hear.   
 Regarding resolution: we had this problem both with 1680x1050 and 1920x1080 resolutions. Couldn’t tell you about others because these are the only ones in use by our developers.   
  
 Regards,   
 Christoph.

---

<div class="post-metadata">

### Author: ![peter.toms](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/p/df788c/32.png) [@peter.toms](https://www.finalbuilder.com/forums/u/peter.toms)
#### Post date: [September 22, 2014, 9:10am UTC](https://www.finalbuilder.com/forums/t/queue-options-window-is-positioned-too-low/5236/5 "2014-09-22T09:10:08Z")

</div>

Thanks for the information Christoph