# OnFailure target

**URL:** https://www.finalbuilder.com/forums/t/onfailure-target/2395
**Category:** Discussion
**Created:** [July 20, 2015, 10:53am UTC](https://www.finalbuilder.com/forums/t/onfailure-target/2395 "2015-07-20T10:53:21Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![ranch](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/r/bcef8e/32.png) [@ranch](https://www.finalbuilder.com/forums/u/ranch)
#### Post date: [July 20, 2015, 10:53am UTC](https://www.finalbuilder.com/forums/t/onfailure-target/2395/1 "2015-07-20T10:53:21Z")

</div>

Hi,  
  
Is the a parallel target in FB 8 like the OnFailure action in earlier versions?  
If not, how may I simulate this action in case of a failure?  
  
Cheers.

---

<div class="post-metadata">

### Author: ![Vincent](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/vincent/32/938_2.png) [@Vincent](https://www.finalbuilder.com/forums/u/Vincent)
#### Post date: [July 20, 2015, 2:52am UTC](https://www.finalbuilder.com/forums/t/onfailure-target/2395/2 "2015-07-20T02:52:16Z")

</div>

OnFailure was removed in FB8, because it made it impossible to make changes that we needed in the stepping engine (dependencies and stepping into included projects). It was amazing how much simpler the code was once it was removed.   
  
 You can simulate the OnFailure with a   
 Try   
 Rin Main Target   
 Catch   
 Run OnFailure Target   
 Raise Exception   
 End