# Mercurial (kiln) trigger for a specific branch

**URL:** https://www.finalbuilder.com/forums/t/mercurial-kiln-trigger-for-a-specific-branch/2075
**Category:** Discussion
**Created:** [January 22, 2013, 10:50am UTC](https://www.finalbuilder.com/forums/t/mercurial-kiln-trigger-for-a-specific-branch/2075 "2013-01-22T10:50:17Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![ranch](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/r/bcef8e/32.png) [@ranch](https://www.finalbuilder.com/forums/u/ranch)
#### Post date: [January 22, 2013, 10:50am UTC](https://www.finalbuilder.com/forums/t/mercurial-kiln-trigger-for-a-specific-branch/2075/1 "2013-01-22T10:50:17Z")

</div>

Hi,

I'm trying to set up a trigger for a certain branch. The branch name contains spaces.

What is the correct convention to write the name of the branch in "Remote Branch to Monitor"?

Cheers.

---

<div class="post-metadata">

### Author: ![Vincent](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/vincent/32/938_2.png) [@Vincent](https://www.finalbuilder.com/forums/u/Vincent)
#### Post date: [January 23, 2013, 2:11am UTC](https://www.finalbuilder.com/forums/t/mercurial-kiln-trigger-for-a-specific-branch/2075/2 "2013-01-23T02:11:43Z")

</div>

Just add double quotes around the branch name.

---

<div class="post-metadata">

### Author: ![ranch](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/r/bcef8e/32.png) [@ranch](https://www.finalbuilder.com/forums/u/ranch)
#### Post date: [January 23, 2013, 9:36am UTC](https://www.finalbuilder.com/forums/t/mercurial-kiln-trigger-for-a-specific-branch/2075/3 "2013-01-23T09:36:18Z")

</div>

Thank you 🙂