# Help and Manual 4+: Selecting "Include Options"

**URL:** https://www.finalbuilder.com/forums/t/help-and-manual-4-selecting-include-options/1088
**Category:** Discussion
**Created:** [January 24, 2009, 1:45am UTC](https://www.finalbuilder.com/forums/t/help-and-manual-4-selecting-include-options/1088 "2009-01-24T01:45:48Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![dressel](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/d/9e8a1a/32.png) [@dressel](https://www.finalbuilder.com/forums/u/dressel)
#### Post date: [January 24, 2009, 1:45am UTC](https://www.finalbuilder.com/forums/t/help-and-manual-4-selecting-include-options/1088/1 "2009-01-24T01:45:48Z")

</div>

In creating a H&M 4+ action, I have a large number of "Include Options" aka "Custom Build" options (I have about 40 for my project).

When I have multipe outputs needed, I have to configure each tab with the include options. This is a lot of work for configuring each tab--and each tab is almost exactly alike.

How about a common options tab so that I only have to configure it once fro the project, and then can add specific conditions required?

For now, the command line will be a lot easier.

Thanks

Ed Dressel

---

<div class="post-metadata">

### Author: ![Vincent](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/vincent/32/938_2.png) [@Vincent](https://www.finalbuilder.com/forums/u/Vincent)
#### Post date: [January 27, 2009, 1:59am UTC](https://www.finalbuilder.com/forums/t/help-and-manual-4-selecting-include-options/1088/2 "2009-01-27T01:59:17Z")

</div>

Thanks for the suggestion, I have added this to our todo list and we will get to it when time permits.