# Finalbuilder and Virtual Server 2012
**URL:** https://www.finalbuilder.com/forums/t/finalbuilder-and-virtual-server-2012/2241
**Category:** Discussion
**Created:** [January 23, 2014, 3:04am UTC](https://www.finalbuilder.com/forums/t/finalbuilder-and-virtual-server-2012/2241 "2014-01-23T03:04:52Z")
**Posts on this page:** 2
**Page:** 1
### Author:  [@rmccabe](https://www.finalbuilder.com/forums/u/rmccabe)
#### Post date: [January 23, 2014, 3:04am UTC](https://www.finalbuilder.com/forums/t/finalbuilder-and-virtual-server-2012/2241/1 "2014-01-23T03:04:52Z")
I am just getting started with Finalbuilder and controling a number VM on a Virtual Server cluster. I have the VMM console installed on my local system, but when I try to use the Virtual Server List action, I get:
Status: Error
Date: 1/23/2014
Time: 08:51:41:260
End: 08:51:41:393
Duration: 00:00:00:133
Action Messages:
Connecting to rbrovmm:8100…
An error occured : Could not access virtual server COM API : Automation server can’t create object
Is there something else I need to install to get the connection?
---
### Author:  [@nevar](https://www.finalbuilder.com/forums/u/nevar)
#### Post date: [January 24, 2014, 5:00am UTC](https://www.finalbuilder.com/forums/t/finalbuilder-and-virtual-server-2012/2241/2 "2014-01-24T05:00:54Z")
Hi Robert,
From my understanding Virtual Server was replaced by Hyper-V around 2008. Therefore I assume your using Hyper-V. If this is the case then the “Hyper V List Virtual Machines” action would be what your after.
Please correct me if I am wrong. Just haven’t heard of Virtual Server 2012.