# FinalBuilder ActionGroup 3062
**URL:** https://www.finalbuilder.com/forums/t/finalbuilder-actiongroup-3062/3535
**Category:** Bugs
**Created:** [August 20, 2014, 3:37am UTC](https://www.finalbuilder.com/forums/t/finalbuilder-actiongroup-3062/3535 "2014-08-20T03:37:45Z")
**Posts on this page:** 7
**Page:** 1
### Author:  [@mij\_kvad](https://www.finalbuilder.com/forums/u/mij_kvad)
#### Post date: [August 20, 2014, 3:37am UTC](https://www.finalbuilder.com/forums/t/finalbuilder-actiongroup-3062/3535/1 "2014-08-20T03:37:45Z")
Hi,
Let’s say we have a finalbuilder script.
ActionGroup: A
\<\< Item 1 \>\>
\<\< Item 2 \>\>
\<\< Item 3 \>\>
ActionGroup: B
\<\< Item 1 \>\>
\<\< Item 2 \>\>
\<\< Item 3 \>\>
When we run our FinalBuilder script our items in the ActionGroups (Item 1 through 3) are not marked as completed but only after the whole script finishes, in previous versions it marked every item while running.
Greetings,
Martijn
---
### Author:  [@nevar](https://www.finalbuilder.com/forums/u/nevar)
#### Post date: [August 21, 2014, 1:05am UTC](https://www.finalbuilder.com/forums/t/finalbuilder-actiongroup-3062/3535/2 "2014-08-21T01:05:14Z")
Hi Martijn,
I have been able to reproduce this issue and will get a fix out today for it.
Also just to confirm, your only seeing this after newly created action groups or pasted action groups? If the project is saved and loaded this issue goes away. Is that correct?
---
### Author:  [@nevar](https://www.finalbuilder.com/forums/u/nevar)
#### Post date: [August 21, 2014, 8:33am UTC](https://www.finalbuilder.com/forums/t/finalbuilder-actiongroup-3062/3535/3 "2014-08-21T08:33:47Z")
Hi Martijn,
Here is the build with the fix for the drawing issue. Please let me know if its fixed in your test project.
[http://downloads.finalbuilder.com/downloads/finalbuilder/700/FB700\_3065.exe](http://downloads.finalbuilder.com/downloads/finalbuilder/700/FB700_3065.exe)
---
### Author:  [@mij\_kvad](https://www.finalbuilder.com/forums/u/mij_kvad)
#### Post date: [August 21, 2014, 12:41pm UTC](https://www.finalbuilder.com/forums/t/finalbuilder-actiongroup-3062/3535/4 "2014-08-21T12:41:33Z")
Hi Jason,
It is an existing project, when I save the project in 3062 and run it again I still see the drawing issues. I have also tested it with 3065 and the drawing issues as described are still there.
Then I tried the following I selected the group, with the right mouse button I have chosen “Cut” and pasted the group back in and then the drawing issues went away. But we have many scripts and this would take to long can’t the script be converted when you open it?
Greetings,
Martijn
---
### Author:  [@mij\_kvad](https://www.finalbuilder.com/forums/u/mij_kvad)
#### Post date: [August 21, 2014, 4:31am UTC](https://www.finalbuilder.com/forums/t/finalbuilder-actiongroup-3062/3535/5 "2014-08-21T04:31:05Z")
Hi Jason,
We have a simple Finalbuilder script
MSBuildTask 1
MSBuildTask 2
MSBuildTask 3
MSBuildTask 4
In version 3062 there is not status change also not when the items are cut and then pasted, the version 3065 show status update only after cut and paste.
The only change we saw in the script where new guids?
Greetings,
Martijn
---
### Author:  [@nevar](https://www.finalbuilder.com/forums/u/nevar)
#### Post date: [August 22, 2014, 2:05am UTC](https://www.finalbuilder.com/forums/t/finalbuilder-actiongroup-3062/3535/6 "2014-08-22T02:05:55Z")
Hi Martijn,
I found the further issue which related to the MSBuild action itself. I have fixed this, and you can find the build located here:
[http://downloads.finalbuilder.com/downloads/finalbuilder/700/FB700\_3069.exe](http://downloads.finalbuilder.com/downloads/finalbuilder/700/FB700_3069.exe)
---
### Author:  [@mij\_kvad](https://www.finalbuilder.com/forums/u/mij_kvad)
#### Post date: [August 22, 2014, 9:29am UTC](https://www.finalbuilder.com/forums/t/finalbuilder-actiongroup-3062/3535/7 "2014-08-22T09:29:32Z")
Fantastic !!! Thanks you!