# Fbcmd output when running async action group (also applies to atcmd)

**URL:** https://www.finalbuilder.com/forums/t/fbcmd-output-when-running-async-action-group-also-applies-to-atcmd/2143
**Category:** Discussion
**Created:** [May 13, 2013, 8:08am UTC](https://www.finalbuilder.com/forums/t/fbcmd-output-when-running-async-action-group-also-applies-to-atcmd/2143 "2013-05-13T08:08:23Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![rafael](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/r/4da419/32.png) [@rafael](https://www.finalbuilder.com/forums/u/rafael)
#### Post date: [May 13, 2013, 8:08am UTC](https://www.finalbuilder.com/forums/t/fbcmd-output-when-running-async-action-group-also-applies-to-atcmd/2143/1 "2013-05-13T08:08:23Z")

</div>

Hi!

We started using a lot of async action groups.

Wow, cool!

But can they be rendered better from cmd line?

See attached

---

<div class="post-metadata">

### Author: ![Vincent](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/vincent/32/938_2.png) [@Vincent](https://www.finalbuilder.com/forums/u/Vincent)
#### Post date: [May 14, 2013, 12:19pm UTC](https://www.finalbuilder.com/forums/t/fbcmd-output-when-running-async-action-group-also-applies-to-atcmd/2143/2 "2013-05-14T12:19:36Z")

</div>

The problem is not so much the async groups as it is the depth of the tree. Try using -H on the command like to disable hierarchical logging.