# Fbcmd.exe and breakpoints

**URL:** https://www.finalbuilder.com/forums/t/fbcmd-exe-and-breakpoints/2457
**Category:** Discussion
**Created:** [February 2, 2016, 12:55pm UTC](https://www.finalbuilder.com/forums/t/fbcmd-exe-and-breakpoints/2457 "2016-02-02T12:55:49Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![sundhed](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/s/b3f665/32.png) [@sundhed](https://www.finalbuilder.com/forums/u/sundhed)
#### Post date: [February 2, 2016, 12:55pm UTC](https://www.finalbuilder.com/forums/t/fbcmd-exe-and-breakpoints/2457/1 "2016-02-02T12:55:49Z")

</div>

Correct me if wrong, but fbcmd in FinalBuilder 6 ignored breakpoints, which was nice since the IDE mostly used for design purposes and you did not have to clear all breakpoints. Fbcmd in FinalBuilder 8 honor breakpoints, which causes fbcmd to run forever.

Is it possible to disable/ignore breakpoints with fbcmd?

---

<div class="post-metadata">

### Author: ![nevar](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/n/c4cdca/32.png) [@nevar](https://www.finalbuilder.com/forums/u/nevar)
#### Post date: [February 2, 2016, 10:17am UTC](https://www.finalbuilder.com/forums/t/fbcmd-exe-and-breakpoints/2457/2 "2016-02-02T10:17:38Z")

</div>

FBCmd should be ignoring all breakpoints. It might be something to do with the a specific project structure. If you could send us a cut down project where the breakpoints are not ignored by FBCMD that would be very helpful.&nbsp;

---

<div class="post-metadata">

### Author: ![nevar](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/n/c4cdca/32.png) [@nevar](https://www.finalbuilder.com/forums/u/nevar)
#### Post date: [February 2, 2016, 11:18am UTC](https://www.finalbuilder.com/forums/t/fbcmd-exe-and-breakpoints/2457/3 "2016-02-02T11:18:41Z")

</div>

Hi Christian,   
  
 I have found the issue and will be doing a release today for a fix. I will update this post with a link when it is available.

---

<div class="post-metadata">

### Author: ![nevar](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/n/c4cdca/32.png) [@nevar](https://www.finalbuilder.com/forums/u/nevar)
#### Post date: [February 3, 2016, 12:24pm UTC](https://www.finalbuilder.com/forums/t/fbcmd-exe-and-breakpoints/2457/4 "2016-02-03T12:24:31Z")

</div>

Hi Christian,   
  
 FinalBuilder 8.0.0.1520 has been released today. You can download this from:   
  
 [http://downloads.finalbuilder.com/downloads/finalbuilder/800/FB800\_1520.exe](http://downloads.finalbuilder.com/downloads/finalbuilder/800/FB800_1520.exe)

---

<div class="post-metadata">

### Author: ![sundhed](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/s/b3f665/32.png) [@sundhed](https://www.finalbuilder.com/forums/u/sundhed)
#### Post date: [February 3, 2016, 9:50am UTC](https://www.finalbuilder.com/forums/t/fbcmd-exe-and-breakpoints/2457/5 "2016-02-03T09:50:32Z")

</div>

Hi Jason,   
  
 Thanks, working great =)   
  
 And yes, it was a migrated scripts with try-catch and main+failure target.   
  
 Best regards,   
 Christian