# FB 5.0.0.130 .net compiler bug

**URL:** https://www.finalbuilder.com/forums/t/fb-5-0-0-130-net-compiler-bug/2791
**Category:** Bugs
**Created:** [February 28, 2007, 5:08am UTC](https://www.finalbuilder.com/forums/t/fb-5-0-0-130-net-compiler-bug/2791 "2007-02-28T05:08:40Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![rod\_prdsoftware](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/rod_prdsoftware/32/39_2.png) [@rod\_prdsoftware](https://www.finalbuilder.com/forums/u/rod_prdsoftware)
#### Post date: [February 28, 2007, 5:08am UTC](https://www.finalbuilder.com/forums/t/fb-5-0-0-130-net-compiler-bug/2791/1 "2007-02-28T05:08:40Z")

</div>

Hi guys,  
  
We are having a [VB.net](http://VB.net) compiler issue since upgrading to FB 5.0.0.130&nbsp; yesterday.&nbsp; We are compiling a .net solution, and for one of the projects within the solution, the \bin\release folder is not being created.&nbsp; Instead the compiled code is ending up in just the \bin directory (which subsequently wrecks our Installshield build).  
  
I rolled back to FB 5.0.0.60 and all is OK again.  
  
Any ideas?  
  
Let me know if you need any screen-shots / info etc.  
  
Thanks,  
  
Rod

---

<div class="post-metadata">

### Author: ![Vincent](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/vincent/32/938_2.png) [@Vincent](https://www.finalbuilder.com/forums/u/Vincent)
#### Post date: [February 28, 2007, 6:09am UTC](https://www.finalbuilder.com/forums/t/fb-5-0-0-130-net-compiler-bug/2791/2 "2007-02-28T06:09:24Z")

</div>

Hi Rod  
  
The only change that I can see might cause this that we removed a hack that was put in during the RC1 timeframe for [VS.NET](http://VS.NET). With the release candidates, msbuild ignored the OutputPath setting from the solution, so we hard coded the output path to bin\configname&nbsp; - Check that the configuration you are using&nbsp; for the build has an output path set correctly in the&nbsp; properties for the project.   
  
I just tested this here and the output path is definitely being taken from the solution’s config output path property.

---

<div class="post-metadata">

### Author: ![rod\_prdsoftware](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/rod_prdsoftware/32/39_2.png) [@rod\_prdsoftware](https://www.finalbuilder.com/forums/u/rod_prdsoftware)
#### Post date: [March 6, 2007, 3:39am UTC](https://www.finalbuilder.com/forums/t/fb-5-0-0-130-net-compiler-bug/2791/3 "2007-03-06T03:39:52Z")

</div>

Thanks Vincent, that was it. All fixed and good now. Sorry about the delay in getting back to you. Best regards, Rod.