# Export Log - On Failure?
**URL:** https://www.finalbuilder.com/forums/t/export-log-on-failure/4470
**Category:** Discussion
**Created:** [March 31, 2011, 10:20am UTC](https://www.finalbuilder.com/forums/t/export-log-on-failure/4470 "2011-03-31T10:20:32Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@deleted\_user](https://www.finalbuilder.com/forums/u/deleted_user)
#### Post date: [March 31, 2011, 10:20am UTC](https://www.finalbuilder.com/forums/t/export-log-on-failure/4470/1 "2011-03-31T10:20:32Z")
On the "On Failure" tab/side I have an event at the end that exports the log using "Export Log" event. But it only exports up to the failure in the "Main" tab/side and does not log/exports any events from the "On Failure" side (which has about 5-6 clean up tasks that run fine). Is this expected? I have 'Export entire Log' checked (which is the default anyway).
When the same project runs on ATCMD.exe, the "On Failure" events/log do show in the command window but are not imported to the html file.
Thanks
---
### Author:  [@stephen.ryan](https://www.finalbuilder.com/forums/u/stephen.ryan)
#### Post date: [April 4, 2011, 5:16am UTC](https://www.finalbuilder.com/forums/t/export-log-on-failure/4470/2 "2011-04-04T05:16:03Z")
Hi
This is a bug with the Export Log action. I have fixed this so that now when the ‘Export Entire Log’ option is enabled the OnFailure action list will be included.
Here is the link to the build which contains this fix:
[http://www.automise.com/downloads/automise/300/at300\_911.exe](http://www.automise.com/downloads/automise/300/at300_911.exe)
Regards,
Steve
---
### Author:  [@deleted\_user](https://www.finalbuilder.com/forums/u/deleted_user)
#### Post date: [April 4, 2011, 6:20am UTC](https://www.finalbuilder.com/forums/t/export-log-on-failure/4470/3 "2011-04-04T06:20:41Z")
Great! What a prompt resolution! I will check it out.. Thanks