# /e command no longer working

**URL:** https://www.finalbuilder.com/forums/t/e-command-no-longer-working/2633
**Category:** Bugs
**Created:** [May 17, 2006, 1:00am UTC](https://www.finalbuilder.com/forums/t/e-command-no-longer-working/2633 "2006-05-17T01:00:15Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![tmchardy](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/t/dbc845/32.png) [@tmchardy](https://www.finalbuilder.com/forums/u/tmchardy)
#### Post date: [May 17, 2006, 1:00am UTC](https://www.finalbuilder.com/forums/t/e-command-no-longer-working/2633/1 "2006-05-17T01:00:15Z")

</div>

I thought it might be something I was doing, but I can clearly see now that in 4.1.0.205 the /e command no longer functions.  
  
Used to:  
Exit final builder after an auto-run if no errors or manual breaks occured.  
  
Now:  
Leaves final builder open in a completed state.

---

<div class="post-metadata">

### Author: ![tate](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/t/e19b73/32.png) [@tate](https://www.finalbuilder.com/forums/u/tate)
#### Post date: [May 17, 2006, 3:50am UTC](https://www.finalbuilder.com/forums/t/e-command-no-longer-working/2633/2 "2006-05-17T03:50:05Z")

</div>

Hi Trevor,  
  
I just tried this with build 223 and it worked fine:

```
https://www.finalbuilder.com/downloads/finalbuilder/410/FB410\_223.exe

Can you try with that build and see if you get the same problem?

cheers,
.t8
```