# Disable validation for project only

**URL:** https://www.finalbuilder.com/forums/t/disable-validation-for-project-only/1315
**Category:** Discussion
**Created:** [September 8, 2009, 10:56am UTC](https://www.finalbuilder.com/forums/t/disable-validation-for-project-only/1315 "2009-09-08T10:56:46Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![deleted\_user](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/deleted_user/32/937_2.png) [@deleted\_user](https://www.finalbuilder.com/forums/u/deleted_user)
#### Post date: [September 8, 2009, 10:56am UTC](https://www.finalbuilder.com/forums/t/disable-validation-for-project-only/1315/1 "2009-09-08T10:56:46Z")

</div>

Hi there,

we're using a few FinalBuilder-projects which fail validation, but work normally. All other projects pass validation. So it would be useful if validation could be turned off on a project-basis, not global. Is there any variable/define which could do that? If not, this might be considered a change request for further versions

Thanks in advance,  
best regards, Phi

---

<div class="post-metadata">

### Author: ![paulsamways](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/p/e8c25b/32.png) [@paulsamways](https://www.finalbuilder.com/forums/u/paulsamways)
#### Post date: [September 9, 2009, 12:27pm UTC](https://www.finalbuilder.com/forums/t/disable-validation-for-project-only/1315/2 "2009-09-09T12:27:39Z")

</div>

Hi Hans,   
  
 I’m intrigued as to why the projects are failing validation?   
  
 As it stands it’s not possible to disable validation on per-project basis.   
  
 Regards,   
 Paul.

---

<div class="post-metadata">

### Author: ![deleted\_user](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/deleted_user/32/937_2.png) [@deleted\_user](https://www.finalbuilder.com/forums/u/deleted_user)
#### Post date: [September 9, 2009, 12:14pm UTC](https://www.finalbuilder.com/forums/t/disable-validation-for-project-only/1315/3 "2009-09-09T12:14:11Z")

</div>

We're using a build project which includes NSIS stuff, but we do not want to install NSIS on every machine (quite a lot).

When "Get TFS&nbsp;Build Parameters" fails we know that we are "local" and do not want to build the NSIS&nbsp;parts of the build. However, the fbp6 gets parsed and on most machines it raises an error saying "No Path to NSIS defined"&nbsp;(or similar). It is not possible to insert a dummy value, because it is checked, too.

When building on the server, NSIS parts should be executed.

Thanks for looking into this,  
Hans