# Command line and Embarcadero XE2 Edition

**URL:** https://www.finalbuilder.com/forums/t/command-line-and-embarcadero-xe2-edition/2279
**Category:** Discussion
**Created:** [May 28, 2014, 5:37am UTC](https://www.finalbuilder.com/forums/t/command-line-and-embarcadero-xe2-edition/2279 "2014-05-28T05:37:50Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![marcer](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/m/2bfe46/32.png) [@marcer](https://www.finalbuilder.com/forums/u/marcer)
#### Post date: [May 28, 2014, 5:37am UTC](https://www.finalbuilder.com/forums/t/command-line-and-embarcadero-xe2-edition/2279/1 "2014-05-28T05:37:50Z")

</div>

Hi,  
  
I use FinalBuilder Embarcadero XE2 Edition version 7.0.0.1725  
  
With this version, is it possible to use a FinalBuilder command line switch /R /E “Myproject.fbp7” to automatically run the project file and exit when done running?  
  
Best regards!

---

<div class="post-metadata">

### Author: ![Vincent](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/vincent/32/938_2.png) [@Vincent](https://www.finalbuilder.com/forums/u/Vincent)
#### Post date: [May 29, 2014, 12:27pm UTC](https://www.finalbuilder.com/forums/t/command-line-and-embarcadero-xe2-edition/2279/2 "2014-05-29T12:27:27Z")

</div>

No, command line builds were not supported with the Embarcadero Edition, you will need to purchase a full version of FinalBuilder to enable them. Contact our sales staff and they can help you upgrade (there is a discount available).