# CAlling C# application in FinalBuilder application

**URL:** https://www.finalbuilder.com/forums/t/calling-c-application-in-finalbuilder-application/870
**Category:** Discussion
**Created:** [June 6, 2008, 12:17pm UTC](https://www.finalbuilder.com/forums/t/calling-c-application-in-finalbuilder-application/870 "2008-06-06T12:17:05Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![deleted\_user](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/deleted_user/32/937_2.png) [@deleted\_user](https://www.finalbuilder.com/forums/u/deleted_user)
#### Post date: [June 6, 2008, 12:17pm UTC](https://www.finalbuilder.com/forums/t/calling-c-application-in-finalbuilder-application/870/1 "2008-06-06T12:17:05Z")

</div>

When i try to call a finalbuilder project which has c# application from the TFSbuild, it is not excuting the c# program inside the final builder project.

---

<div class="post-metadata">

### Author: ![deleted\_user](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/deleted_user/32/937_2.png) [@deleted\_user](https://www.finalbuilder.com/forums/u/deleted_user)
#### Post date: [June 6, 2008, 5:31am UTC](https://www.finalbuilder.com/forums/t/calling-c-application-in-finalbuilder-application/870/2 "2008-06-06T05:31:09Z")

</div>

I fogot to mention that i used both &nbsp;Execute&nbsp;and &nbsp;RunDos Action to execute the program, it works fine when run through final builder. But when i excute team build to call the finalbuilder it doesn't excute the program. It doesn't give any error either. I am not sure if i am missing something

---

<div class="post-metadata">

### Author: ![angus](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/a/b3f665/32.png) [@angus](https://www.finalbuilder.com/forums/u/angus)
#### Post date: [June 10, 2008, 1:18am UTC](https://www.finalbuilder.com/forums/t/calling-c-application-in-finalbuilder-application/870/3 "2008-06-10T01:18:13Z")

</div>

Hi padmavathy,   
  
 Sorry to hear you’re having problems.   
  
 How are you specifying the executable path? Does the program/action complete, or does it hang and require terminating? does the C# application open a GUI or do anything else which may be hard to do when “running as a service” (which is how Team Build runs.)   
  
 Regards,   
  
 Angus

---

<div class="post-metadata">

### Author: ![deleted\_user](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/deleted_user/32/937_2.png) [@deleted\_user](https://www.finalbuilder.com/forums/u/deleted_user)
#### Post date: [June 13, 2008, 9:39am UTC](https://www.finalbuilder.com/forums/t/calling-c-application-in-finalbuilder-application/870/4 "2008-06-13T09:39:56Z")

</div>

Thanks Angus for the reply. It looks like the user id i was using doesn’t have proper permissions.   
  
 Thanks   
 Padma