# 'Build VS.Net Solution' and Version Info

**URL:** https://www.finalbuilder.com/forums/t/build-vs-net-solution-and-version-info/530
**Category:** Discussion
**Created:** [July 18, 2007, 5:42am UTC](https://www.finalbuilder.com/forums/t/build-vs-net-solution-and-version-info/530 "2007-07-18T05:42:00Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![dpaultn](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/d/e9c0ed/32.png) [@dpaultn](https://www.finalbuilder.com/forums/u/dpaultn)
#### Post date: [July 18, 2007, 5:42am UTC](https://www.finalbuilder.com/forums/t/build-vs-net-solution-and-version-info/530/1 "2007-07-18T05:42:00Z")

</div>

I must be missing something.&nbsp; I created a PropertySet using the .NET Assembly Numbers, but it never is avaliable in the VersionInfo tab in the Build VS.Net Solution.&nbsp; The PropertySet creation is above the Build action.&nbsp; What's the trick...

Thanks,

Dave

---

<div class="post-metadata">

### Author: ![angus](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/a/b3f665/32.png) [@angus](https://www.finalbuilder.com/forums/u/angus)
#### Post date: [July 19, 2007, 1:54am UTC](https://www.finalbuilder.com/forums/t/build-vs-net-solution-and-version-info/530/2 "2007-07-19T01:54:22Z")

</div>

Hi David,   
  
 What version of FinalBuilder are you using? This seems to work for me, in the latest version of FinalBuilder 5, but there could be a bug in the IDE. If you can’t get it to work, could you email the project file to support at finalbuilder dot com so we can take a look at it? Thanks very much.   
  
 Regards,   
  
 Angus

---

<div class="post-metadata">

### Author: ![angus](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/a/b3f665/32.png) [@angus](https://www.finalbuilder.com/forums/u/angus)
#### Post date: [July 20, 2007, 1:32am UTC](https://www.finalbuilder.com/forums/t/build-vs-net-solution-and-version-info/530/3 "2007-07-20T01:32:54Z")

</div>

Hi David,   
  
 Thanks for sending the project. Sorry that I didn’t read your post more carefully the first time.   
  
 A “.NET Assembly Numbers” PropertySet can be used to set the Assembly Info in the Build [VS.NET](http://VS.NET) action. To set the Version Info, you’ll need to create a PropertySet of type “Win32 Version Numbers”. If you need to set both, you’ll unfortunately need to create two property sets.   
  
 Regards,   
  
 Angus