# Build 941 - Trigger build queue failures don't show in event log

**URL:** https://www.finalbuilder.com/forums/t/build-941-trigger-build-queue-failures-dont-show-in-event-log/5758
**Category:** Bugs
**Created:** [October 17, 2012, 2:00am UTC](https://www.finalbuilder.com/forums/t/build-941-trigger-build-queue-failures-dont-show-in-event-log/5758 "2012-10-17T02:00:20Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![skermajo](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/s/bb73d2/32.png) [@skermajo](https://www.finalbuilder.com/forums/u/skermajo)
#### Post date: [October 17, 2012, 2:00am UTC](https://www.finalbuilder.com/forums/t/build-941-trigger-build-queue-failures-dont-show-in-event-log/5758/1 "2012-10-17T02:00:20Z")

</div>

Hello,

When a trigger executes, and the build it's queueing has a repository in an error state, nothing is shown in the event log about the build failing to queue.

The trigger's 'Last Executed' time is correct, but there was no resulting build (I assume because there was a repository in an error state). From memory, when queueing a build manually an entry is put in the event log if it fails to queue. Should the same be true for builds queued by triggers?

Hopefully I haven't overlooked something simple here.

Cheers

Joel

---

<div class="post-metadata">

### Author: ![Vincent](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/vincent/32/938_2.png) [@Vincent](https://www.finalbuilder.com/forums/u/Vincent)
#### Post date: [October 17, 2012, 3:42am UTC](https://www.finalbuilder.com/forums/t/build-941-trigger-build-queue-failures-dont-show-in-event-log/5758/2 "2012-10-17T03:42:39Z")

</div>

Hi Joel   
  
 You haven’t overlooked anything, I just had a look at the code, and in the section where it checks the repositories I found this