# Build 926 - Repo not showing in 'Changes' for build
**URL:** https://www.finalbuilder.com/forums/t/build-926-repo-not-showing-in-changes-for-build/5755
**Category:** Bugs
**Created:** [October 5, 2012, 8:01am UTC](https://www.finalbuilder.com/forums/t/build-926-repo-not-showing-in-changes-for-build/5755 "2012-10-05T08:01:01Z")
**Posts on this page:** 18
**Page:** 1
### Author:  [@skermajo](https://www.finalbuilder.com/forums/u/skermajo)
#### Post date: [October 5, 2012, 8:01am UTC](https://www.finalbuilder.com/forums/t/build-926-repo-not-showing-in-changes-for-build/5755/1 "2012-10-05T08:01:01Z")
Happy Friday!
Not sure quite how to explain this one. We've got a build where a certain repo isn't showing up in the 'changes' tab of the build, when we've set it to associate 'Most recent changesets'. All of our repos are Mercurial (8 are associated with the build).
A few things of note about the repo in question:
1. It's the only repo we've told to use a branch other than default
2. There is another Continua repo pointing at the same soruce but on the default branch (not associated with this build)
3. The repo is not copied to the agent until stage 4 of the build, whereas all others are at least partially copied in stage 1
4. It's not getting new revisions despite its polling frequency being set to 60 seconds (editing and saving the repo again aren't solving this either)
No errors in the eventlog. Is this possibly related to known issues?
Cheers
Joel
---
### Author:  [@skermajo](https://www.finalbuilder.com/forums/u/skermajo)
#### Post date: [October 5, 2012, 8:32am UTC](https://www.finalbuilder.com/forums/t/build-926-repo-not-showing-in-changes-for-build/5755/2 "2012-10-05T08:32:36Z")
Doesn’t seem to be related to the stage repository rules. Just moved another repo copy to a later stage and it still appears in changes.
---
### Author:  [@vinnie](https://www.finalbuilder.com/forums/u/vinnie)
#### Post date: [October 5, 2012, 8:35am UTC](https://www.finalbuilder.com/forums/t/build-926-repo-not-showing-in-changes-for-build/5755/3 "2012-10-05T08:35:17Z")
Hi Joel, for the repo that's not working, can you check which branches the repository was setup to monitor? If you edit the repository, check the field "Branches to Monitor". I have a feeling it's set to "Single Branch" and the branch value is "default". You probably need to change the "Branch name" value to the branch you want to monitor.
---
### Author:  [@skermajo](https://www.finalbuilder.com/forums/u/skermajo)
#### Post date: [October 5, 2012, 8:41am UTC](https://www.finalbuilder.com/forums/t/build-926-repo-not-showing-in-changes-for-build/5755/4 "2012-10-05T08:41:02Z")
Hi Vinnie
Unfortunately that's not the problem. We're setup to monitor a single branch, but it's the correct branch name (not default).
If you monitor all branches, how do you tell your stage which branch to use? Can't see anything about that in the repository rules docs.
Cheers
Joel
---
### Author:  [@vinnie](https://www.finalbuilder.com/forums/u/vinnie)
#### Post date: [October 5, 2012, 8:58am UTC](https://www.finalbuilder.com/forums/t/build-926-repo-not-showing-in-changes-for-build/5755/5 "2012-10-05T08:58:04Z")
Once you select “All branches” it changes which options are shown for triggers and when manually starting a build. Lets say you have a Repository Trigger… if you edit that, you will now see an additional field called “Trigger from”, from the dropdown you can choose to select all branches, default branch or branch by pattern. If you manually start a build and you get the prompt dialog (single play button icon) then you get to type in the branch you want that build to use… if you selected the quick start build (double play button icon) then it will automatically select the default branch.
We’re looking into your issue now.
---
### Author:  [@skermajo](https://www.finalbuilder.com/forums/u/skermajo)
#### Post date: [October 5, 2012, 8:58am UTC](https://www.finalbuilder.com/forums/t/build-926-repo-not-showing-in-changes-for-build/5755/6 "2012-10-05T08:58:05Z")
After restarting the server, the repo appears to be polling again, but still not showing up in the build 'changes'.
---
### Author:  [@vinnie](https://www.finalbuilder.com/forums/u/vinnie)
#### Post date: [October 5, 2012, 8:58am UTC](https://www.finalbuilder.com/forums/t/build-926-repo-not-showing-in-changes-for-build/5755/7 "2012-10-05T08:58:42Z")
Do the changes show up in the Changes tab on the Configuration view?
---
### Author:  [@skermajo](https://www.finalbuilder.com/forums/u/skermajo)
#### Post date: [October 5, 2012, 9:05am UTC](https://www.finalbuilder.com/forums/t/build-926-repo-not-showing-in-changes-for-build/5755/8 "2012-10-05T09:05:23Z")
Yes they do - didn’t know that tab was there - that’s handy.
---
### Author:  [@Vincent](https://www.finalbuilder.com/forums/u/Vincent)
#### Post date: [October 5, 2012, 10:08am UTC](https://www.finalbuilder.com/forums/t/build-926-repo-not-showing-in-changes-for-build/5755/9 "2012-10-05T10:08:09Z")
Hi Joel
We’re trying to figure out what could have caused this. How were your builds being started (triggers, manually)?
Are the changes from before you restarted the server showing up on the config changes page?
The only thing I can think of is that the repo was in some sort of error state, but then I’m pretty sure build 926 has some changes we made so that if any repo associated with a config is in an error state it will not start a build for that config (no point, since it will just fail anyway as you won’t have the source). We’ve been working on improving how repository errors are handled, so they should at least show up under the admin\repositories page(or the config wizard repositories page) as errored (shows a warning triangle next to the
We should have another build ready tonight, Vinnie is busy uipdating the build server with the latest build and then we’ll fire off a beta build. There are quite a few bug fixes since the last build.
---
### Author:  [@skermajo](https://www.finalbuilder.com/forums/u/skermajo)
#### Post date: [October 6, 2012, 1:50am UTC](https://www.finalbuilder.com/forums/t/build-926-repo-not-showing-in-changes-for-build/5755/10 "2012-10-06T01:50:29Z")
Hi Vincent
Yes, the changes that were missing before the server restart are appearing in the configuration changes after the restart. I have had repos in an error state stopping builds before (with build 926), but I was able to resolve and continue. I’ll throw 930 on and have another go.
Cheers
---
### Author:  [@skermajo](https://www.finalbuilder.com/forums/u/skermajo)
#### Post date: [October 6, 2012, 2:55am UTC](https://www.finalbuilder.com/forums/t/build-926-repo-not-showing-in-changes-for-build/5755/11 "2012-10-06T02:55:22Z")
930, the repo is still not showing up in the build changs. Here's why I assume it should be showing, the repo in question is 'SingleUserInstallScripts'.
Build configuration repos:
Configuration changes:
Manually queuing the build:
---
### Author:  [@skermajo](https://www.finalbuilder.com/forums/u/skermajo)
#### Post date: [October 6, 2012, 2:56am UTC](https://www.finalbuilder.com/forums/t/build-926-repo-not-showing-in-changes-for-build/5755/12 "2012-10-06T02:56:29Z")
Resuling build changes, where I'm assuming 'SingleUserInstallScripts' should show but doesn't:
---
### Author:  [@Vincent](https://www.finalbuilder.com/forums/u/Vincent)
#### Post date: [October 6, 2012, 5:23am UTC](https://www.finalbuilder.com/forums/t/build-926-repo-not-showing-in-changes-for-build/5755/13 "2012-10-06T05:23:56Z")
Hi Joel
Can you check if the repository is disabled? If the repo is disabled then the changesets will not be associated with the build. I’ll look at adding more status information to the timeline when the changeset association is done.
---
### Author:  [@skermajo](https://www.finalbuilder.com/forums/u/skermajo)
#### Post date: [October 6, 2012, 6:50am UTC](https://www.finalbuilder.com/forums/t/build-926-repo-not-showing-in-changes-for-build/5755/14 "2012-10-06T06:50:53Z")
It's enabled. Setup below:
---
### Author:  [@skermajo](https://www.finalbuilder.com/forums/u/skermajo)
#### Post date: [October 6, 2012, 7:05am UTC](https://www.finalbuilder.com/forums/t/build-926-repo-not-showing-in-changes-for-build/5755/15 "2012-10-06T07:05:20Z")
There is another repo that is disabled that is pointing to the same source path (but a different branch).
---
### Author:  [@Vincent](https://www.finalbuilder.com/forums/u/Vincent)
#### Post date: [October 6, 2012, 10:36am UTC](https://www.finalbuilder.com/forums/t/build-926-repo-not-showing-in-changes-for-build/5755/16 "2012-10-06T10:36:54Z")
Hi Joel
I’m at a loss to explain what is going on here. We’ll add some more debugging info on Tuesday (Monday is a pub holiday here), hopefully that will shed some light on the subject. We’ll also test with a lot of repositories assigned to a config, as I’m not sure we have really tested with more than 3 or 4 repos on a config.
---
### Author:  [@vinnie](https://www.finalbuilder.com/forums/u/vinnie)
#### Post date: [October 10, 2012, 1:36am UTC](https://www.finalbuilder.com/forums/t/build-926-repo-not-showing-in-changes-for-build/5755/17 "2012-10-10T01:36:01Z")
Fixed in the next build, tell us how you go Joel.
---
### Author:  [@skermajo](https://www.finalbuilder.com/forums/u/skermajo)
#### Post date: [October 11, 2012, 8:52am UTC](https://www.finalbuilder.com/forums/t/build-926-repo-not-showing-in-changes-for-build/5755/18 "2012-10-11T08:52:29Z")
Thanks Vinnie, it’s now associating!
Also, Continua has to be one of the easiest server applications to install/upgrade I’ve ever used! Great work on the installer - it’s too easy 😄