# Breakpoint Icon is touchy

**URL:** https://www.finalbuilder.com/forums/t/breakpoint-icon-is-touchy/691
**Category:** Discussion
**Created:** [December 12, 2007, 5:04am UTC](https://www.finalbuilder.com/forums/t/breakpoint-icon-is-touchy/691 "2007-12-12T05:04:33Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![rwerning](https://www.finalbuilder.com/forums/letter_avatar_proxy/v4/letter/r/65b543/32.png) [@rwerning](https://www.finalbuilder.com/forums/u/rwerning)
#### Post date: [December 12, 2007, 5:04am UTC](https://www.finalbuilder.com/forums/t/breakpoint-icon-is-touchy/691/1 "2007-12-12T05:04:33Z")

</div>

In FB5 when you use the mouse to click on a build&nbsp;action and put a breakpoint in, it's pretty touchy for removing the break point.&nbsp; You can't click on the icon itself, you have to click in the little whitespace to the left of the icon between that and the splitter.&nbsp; The F5 works fine of couse, but I'm pretty sure that in FB4 you could click on the Icon itself and have it toggle the breakpoint off.&nbsp; I thought it was broken the first couple of times I used it until I realized you couldn't click on the Icon to remove it.

Thanks,  
Rich Werning  
TIP Technologies, Inc.

---

<div class="post-metadata">

### Author: ![Vincent](https://www.finalbuilder.com/forums/user_avatar/www.finalbuilder.com/vincent/32/938_2.png) [@Vincent](https://www.finalbuilder.com/forums/u/Vincent)
#### Post date: [December 12, 2007, 10:16am UTC](https://www.finalbuilder.com/forums/t/breakpoint-icon-is-touchy/691/2 "2007-12-12T10:16:08Z")

</div>

Hi Rich   
  
 This is a known issue with the tree control we use (VirtualTreeView), we took an update to fix another issue and it introduced this issue. I haven’t looked at it in a while, I will check today to see if this can be resolved now.